Easy Glider

DSCF1488Most 6mm gamers would agree how GHQ produce a lot of great looking models, typically they’re small bubble packs of five vehicles, however they do produce a series of Combat Commands, boxed sets for entire regiments and the like but most of these are simply collection of the bubble packs. By far the sexiest one is the British Horsa Glider Assault Team partly because it’s British but also because it’s effectively Operations Tonga or Market Garden in a box and excites me as much as when I first heard about either of those operations via films like “The Longest Day” or “A Bridge too Far”.

Nostalgia aside this is a very simple kit, it comes with 48 Para’s, a few heavy weapons, and four jeeps, although my set came with six so thanks to GHQ for that. It also comes with 3 Horsa gliders which are basically four part kits as seen above, and with a scale wingspan of around 95mm are absolute beasts. There’s little filing to do as there’s little sign of mould marks nor flash, and the parts typically fit together well.

DSCF1490The instructions suggest a number of ways of putting them together, depending on your preference be it for the Horsa in flight, on the ground, or on the ground with the nose opened to get the bigger gear out. The most fragile part to start with is the tail assembly which did need a slight bend to set everything square. To start I decided I’d go for Horsa in flight, as I’d prefer them all singing all dancing.

DSCF1494Lo and behold within minutes there’s your basic Horsa, very simple and to be frank I wish I’d just gone for this level of modelling as it got fiddly and frustrating very quickly.

DSCF1497Thankfully GHQ supply spares for the fiddly bits, some you might need because you get it wrong, others because not all the parts on all the sprues are complete.

DSCF1499

First on is the skid plate, which you really can do without, and the nose wheels. The nose wheels are on a long rod which looks likely to snap off pretty easily so I’ve made it shorter and therefore more stable.

DSCF1502Next are the main wheels either side which are quite fiddly too. The small indentation to the right of the skid-plate is where you need to drill your hole if you’re going to mount it on a flight stand. A bit of a must-do as I see it.

DSCF1506Once an in-flight version is completed this is what you’ll have, and the keener eyed might have noticed a problem, it sits arse heavy, mainly because of the skid-plate. Even without it the model will be arse heavy, and although there’s some space inside where you could try counter balancing don’t bother trying like I did with later attempts as I estimate the weight needed to make it sit properly or nose heavy is around the eight gram mark. Of course this won’t be noticed when it’s in flight, and for deployed after landing it’s not a great problem, although I found it frustrating and put the project in a corner for a while as if it were a sulky child.

During landing it was quite usual for a Horsa to lose it’s wheels and skid-plate, so the other two have none of the extras and sit at a more realistic angle.

DSCF1932A quick splash of paint later and it was onto putting the invasion stripes on, just to prevent the Yanks from shooting them up by mistake. I’ve gloss varnished the wings for this to make it easier, and also bought the GHQ invasion stripes decals. I wasn’t too chuffed to realise how despite the decals being the official ones none of them were big enough for the job in hand. Just why the invasion stripes aren’t, like wallpaper, long strips which can be cut to size is beyond me but hey ho…

DSCF2022On goes the first stripes, I’ve put them slightly out of place because I didn’t want to have to deal with the sloping edge of the wing.

DSCF2024When it came to put the second set on another difficulty made itself known, basically the stripes aren’t of equal width either. When I started this project I laughed when a chum suggested painting these on, preferring as I did to use decals, but it was at this stage I wish I’d listened. These decals are manically fiddly to start with, and it doesn’t help to have that multipled, especially when I believe it’s fair to assume using GHQ decals will make it easier.

DSCF2211Here’s the trio finished, the one atop is the one with wheels, etc, the others don’t have them. A lovely little set fit for anyone’s tabletop, and still the sexiest of the Battle Command series. Considering they’re really just a four piece kit GHQ would do well to address the invasion stripe problem, as for me that alone was the longest part of the entire assembly and painting. I’m still scratching my head at how I’ll fit these into the storage box supplied.

Advertisements

Tags: , , , , , , , , , , , , ,

2 Responses to “Easy Glider”

  1. Bill Zopff Says:

    Nice work on the models evolution. Do you have any pics of the model in a diaroma or during a wargame?

  2. 6milphil Says:

    Not yet Bill, but check back as it will feature in a game in the next couple of weeks.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: