Carden Me?

Having a sort through the lead mountain is always a joy, forgotten pieces are revealled with all the excitement from buying them in the first place. This Carden Loyd universal carrier is made by Reiver Miniatures and I picked it up at Salute 2011 while having a natter with Red Rich who’d put on that year’s VBCW game.

It’s a crisp solid metal casting and surprisingly solid for such a small model.  It’s few pieces, the chassis, the lid, two tracks and a Vickers HMG. The chassis has a couple of notches so you physically can’t put the tracks on the wrong way around, a smart touch. The Vickers doesn’t have an ammo box, but it’s simple enough to add one and yes it really does go on at that jaunty angle. Not so with the tripod which usually goes on the driver’s side of the “bonnet”.  It would be a folded one and I don’t have any of those in my scraps box so I left it off.

I’d rather not base vehicles like this but I did think it’d get whalloped in game so a base was a must.  I used the ever wonderful milliput for the ground so I could press the models tracks into it and have trackmarks, if you’re doing this it’s best to do it with the bare metal piece, but if you only think of it after painting you need to get both pieces damp to avoid problems.

I wanted to put a few pieces in the stowage bins, so I used various pieces from the Warlord Games plastic British sprues plus a white metal petrol can.  I’m pleased with it, should I do another one I’d do it with the lid propped up and a full crew.

Leaf it out

The fourth 28mm horse I’ve painted is this British officer from Great War Miniatures who only on being based revealed himself to be crookedly mounted. This makes his nationally questionable and suggests he might be a fifth-columnist. It’s a one piece cast so the poor saddle skills aren’t of my making. Aside from from that it’s a pleasant figure which I wanted to make more of so I added a couple of hounds. I don’t remember whose dogs those are, but they suit well.

I also wanted to try the leaf scatter on the base rather than flock. I’ve rarely seen it used by gamers but it’s all the rage with military modellers. It’s quite difficult to use, the tub has plenty of woody surplus which has to be picked out before application, and being irregular is awkward to lay in any thickness.

Although suitable for both World Wars I’ll also be using this charactor in VBCW as Hercules Grytpype-Thynne  a caddish officer with an eye on villainy disguised by high rank and aided by a pocket full of gorillas.

In a Battlefield of their own

Happy coincidences are always welcome, especially when they produce figures which fit into somewhere the manufacturer didn’t intend.  These modern figures from Hasslefree fit quite neatly into the world of the popular game “Battlefield 3”. For a player of that game, like me, it does make them irresistable.  The figures are very similar but have a choice of two main weapons and seperate heads.  Giving them different paintjobs makes them look less similar so that’s the course I took.

These come on slotta bases, and like a lot of the smaller producers it’s a restriction which the sculptors strive to escape from. Kevin White is no different in this aspect and the miniatures feet are barely in contact with the slotta bar. As I base on tuppences having such a small area of contact between figure and base can be a problem.

Not wanting to repeat problems I’ve had before when totally removing the slotta bar I decided on a new angle and this was to cut away the bulk of it leaving just a thin strip. This gives a lot more contact area but also allows the lightness sculpted in to the piece. Worth a try and a lot quicker than pinning.

In the computer game the troops have a very loose dress code, so rather than try to replicate a scheme I decided to just go for the gneral Battlefield Casual look which they all seem to have. I’m happy with the finish althoug, yet again, the photos have me sucking my teeth at the touches of dust, the odd wrong dab, etc, which only becomes apprent at this size. Good news is it distracts me from any blurry photos.

Hasslefree are about to release another pair in this series, and I suspect they’ll be as animated, well detailed and generally brilliantly sculpted as we’ve come to expect. A must-paint.

In the Navy

Recently I traded with the cosmopolitan  Akula for the remnants of his naval forces from his VBCW project. Some of you might recall how he built an eight foot long aircraft carrier, thankfully that wasn’t part of the deal. I originally thought it was just a few figures, but it turned out to be an entire navy plus a couple of Torpedo Boats by PMC games.

A few pieces have been added, namely a splash of brown paint to bring the decking to the fore, a ships wheel, decal numbers, a lifebelt, a cleat on the bow, and to gun them up a little with a rack of three depth charges. I did look into getting a couple more PMC nautical pieces but it proved fruitless.

Of course two boats do not a navy make, so I’ve started on a midget two man submarine, which can be seen in it’s current state below. I’m still sourcing torpedos for it but expect to see a post about it once finished. The base structure is a toy submarine, Micro Machines perhaps, with the main conning tower hacked off. The fore structure had enough room to cut a window in so expect a face to be peering out of it.

I’m also going to scratchbuild a Clyde Puffer having finally tracked down some basic plans which were free. All will be kept clean of flags and nation marks so they can be used in a variety of game not least both VBCW and WW2. Full steam ahead!

Tim waits for no-one

It’s always surprising to see a paintjob you’re perfectly happy with once you’ve taken a photo of it and see it four times large and no more so than with this great figure of Tim Collins from the freebie range from The Assault Group. Enlarged it doesn’t look so good although in part that is down to the narcissistic nature of painting figures combined with the paranoid self-criticism which drives it onward. If you’re ever totally satisfied with your efforts there’s a good chance you’ll just give up there and then having reached the perfection you seek, so I’m not complaining.  It’s a simple figure to paint and I enjoyed it, right up to seeing it so large. Northwards!

He ain’t heavy, he’s my loader…

Here’s a couple more Afghan support weapons by Eureka which I picked up at Salute 2012.   They’re the usual joy to paint, even if my photos aren’t very good. The recoiless rifle is on a very big base, and there’s a big space near the loader because the ammo box wasn’t in the bag.

Thankfully Nic at Eureka was happy to send me one all the way from Australia, not that I’ve had time to paint and add it. The weapon was a little tricky to get together right but plenty of testing was the way to do it, with gentle tweaks to get the legs of the two-part tripod the right height.

Here’s the Eureka Afghan mortar, which has one figure sculpted so you can set him up with his hand in the ammo box. Well I was impressed. A much tighter fit on the base which I prefer.

Again a slightly tricky assembly of the weapon with three pieces which have to be glued simultaneously as I see it. Should you glue the tube into the base plate seperately it might not fit onto the bipod without being too splayed. Tricky but not impossible.

Again a fine example of the brilliance of digital photography is the small hair on the base plate while making everything else slightly blurred. The hair has since been removed, imprisoned and under going severe interrogation.

Command & Conquer

I wrapped up my British modern forces with this British Infantry Platoon Command from the Assault Group and it’s a fitting end.  This pack contains two officers waving their arm around, a field radio man and a soldier with a 2 inch mortar.

When I started painting the new British MTP camo I was quite hesitant but happy with the eventual results. As I’ve done more it’s become a speedy freehanded joy although it has evolved into getting larger in pattern and lighter in overall shade. Hopefully these will mix well and produce the variations you see across a number of troops in the field.

A small hole was drilled into the top of the radio pack for a small aerial to be added using a thin pin with the head snipped off. It might not be that accurate as I’ve seen some radios which have some folding type of antenna and others which seem to thicken towards the top, almost like a silencer on a gun barrel. It suits my needs of course, and for added realism it’s likely to stop working at the most inconvenient time.

It’s very likely for these pieces to become primary targets for snipers based on the old idea that anyone waving their arms around must be an officer and should be shot first.

The 2 inch mortar is an unusual piece of kit as it’s been used by the British Army in one form or another for almost one hundred years. It started life as the 2 inch Medium Mortar in 1915, only to be dropped two years later.  By 1937 the over-titled Ordnance SBML 2 inch mortar was developed and saw service for decades until the late 1980s, being replaced by the metric L9A1 51mm Light Mortar or 2.02 inch.  Which is what is used today and this chap has. Watch out Terry Taliban.

Akula Kon

Being lucky is always a good thing, no more so than when I was lucky enough to find a golden ticket to the world’s smallest gaming show: Akula Kon. Held in a secret high-security facility hidden deep within the Yorlshire Moors I gathered with a number of Frothers; project maniac Akula, renaissance man Bungle, paint maestro Duff and Hasslefree’s master sculptor Kev White. There were no traders and only one table, but what a table. Visitors to Salute 2011 should remember Akula’s Battlefield inspired Arica Bay table, and that was what we played on except with a couple of hundred zombies. What follows is a number of photo’s in no particular order taken while I strained to keep up with the conversation. It’s dificult to talk with a beer on the go…

A good time was had by all, and on behalf of all his guests a big thank you to Akula for his hospitality and the sport. The only perturbing part was the vaguely homoerotic ceremony some of them seemed to enjoy. I can’t bring myself to describe it, but you will find photographic evidence of the depravity below.

 

Even more Bazaar

Filling out the Jihadistan project gave me the chance to paint these rather brilliant Eureka miniatures‘ middle eastern civilians. There’s also a couple of stalls but I haven’t quiet figured out the best way to base those so they can wait.  It’s easy to assume how simple figures are simple to sculpt, and the burqa clad ladies might ecourage that train of thought.

However I already have a couple of burqa wearers and they’re simple figures simply done whereas these have been much better made. Each figure has a distinct attitude in it’s carving making them look more like a moment frozen in time.

They’re also rather timeless, with the exception of the woman with carrier bags, so could fit in an ancient scenario right up to the modern day. Although I wouldn’t buy anything from the traders I’ll be knocking on Eurekas door again.

Crouchie’s Workbench

En route to Dover model shop  the other day I pooped in to see Uncle Crouchie to deliver some resin cats to him and got the chance to see what everyone’s gaming Uncle had on his workbench, well his dining table.

First off this delightful light tank whose name I’ve forgotten. He did tell me but my knowledge isn’t as broad as his especially when it comes to the obscure which he builds a lot of to our delight.

Hopefully this is due for production, but we’ll have to wait and see.

This charmer is an early WW2 Belgian motor trike. Crouchie tracked down a couple of photos during an exhaustive search and from those he started this. The motorcycle is an adaption of his combination for the Belgians.

The bad news is how this isn’t for production, it’s just for his own use. A shame not least beacuse I imagine the VBCW crowd would snap this up.