Posts Tagged ‘gaming’

Carden Me?

December 19, 2012

DSC03718-001Having a sort through the lead mountain is always a joy, forgotten pieces are revealled with all the excitement from buying them in the first place. This Carden Loyd universal carrier is made by Reiver Miniatures and I picked it up at Salute 2011 while having a natter with Red Rich who’d put on that year’s VBCW game.

DSC03720-001It’s a crisp solid metal casting and surprisingly solid for such a small model.  It’s few pieces, the chassis, the lid, two tracks and a Vickers HMG. The chassis has a couple of notches so you physically can’t put the tracks on the wrong way around, a smart touch. The Vickers doesn’t have an ammo box, but it’s simple enough to add one and yes it really does go on at that jaunty angle. Not so with the tripod which usually goes on the driver’s side of the “bonnet”.  It would be a folded one and I don’t have any of those in my scraps box so I left it off.

DSC03715-001I’d rather not base vehicles like this but I did think it’d get whalloped in game so a base was a must.  I used the ever wonderful milliput for the ground so I could press the models tracks into it and have trackmarks, if you’re doing this it’s best to do it with the bare metal piece, but if you only think of it after painting you need to get both pieces damp to avoid problems.

DSC03717-001I wanted to put a few pieces in the stowage bins, so I used various pieces from the Warlord Games plastic British sprues plus a white metal petrol can.  I’m pleased with it, should I do another one I’d do it with the lid propped up and a full crew.

Advertisements

Leaf it out

December 18, 2012

DSC03711-001The fourth 28mm horse I’ve painted is this British officer from Great War Miniatures who only on being based revealed himself to be crookedly mounted. This makes his nationally questionable and suggests he might be a fifth-columnist. It’s a one piece cast so the poor saddle skills aren’t of my making. Aside from from that it’s a pleasant figure which I wanted to make more of so I added a couple of hounds. I don’t remember whose dogs those are, but they suit well.

DSC03708-001I also wanted to try the leaf scatter on the base rather than flock. I’ve rarely seen it used by gamers but it’s all the rage with military modellers. It’s quite difficult to use, the tub has plenty of woody surplus which has to be picked out before application, and being irregular is awkward to lay in any thickness.

DSC03709-001Although suitable for both World Wars I’ll also be using this charactor in VBCW as Hercules Grytpype-Thynne  a caddish officer with an eye on villainy disguised by high rank and aided by a pocket full of gorillas.

Pull the Udder One

December 18, 2012

DSC03706-001A short post with some poor photos of the Warlord Games dead livestock which I enjoyed painting as the Ayrshire breed, spurred on by them re-releasing them while I still had an unopened blister packet from the original release.

DSC03707-001

When I first saw these I thought they were a must have. The first dead cattle I recall seeing in a war film were those in Saving Private Ryan during the radar station scene. I’m not certain that was a cinematic first, but it’s what they reminded me of, well that and how many animals get slaughtered during war without much notice.

In a Battlefield of their own

November 29, 2012

Happy coincidences are always welcome, especially when they produce figures which fit into somewhere the manufacturer didn’t intend.  These modern figures from Hasslefree fit quite neatly into the world of the popular game “Battlefield 3”. For a player of that game, like me, it does make them irresistable.  The figures are very similar but have a choice of two main weapons and seperate heads.  Giving them different paintjobs makes them look less similar so that’s the course I took.

These come on slotta bases, and like a lot of the smaller producers it’s a restriction which the sculptors strive to escape from. Kevin White is no different in this aspect and the miniatures feet are barely in contact with the slotta bar. As I base on tuppences having such a small area of contact between figure and base can be a problem.

Not wanting to repeat problems I’ve had before when totally removing the slotta bar I decided on a new angle and this was to cut away the bulk of it leaving just a thin strip. This gives a lot more contact area but also allows the lightness sculpted in to the piece. Worth a try and a lot quicker than pinning.

In the computer game the troops have a very loose dress code, so rather than try to replicate a scheme I decided to just go for the gneral Battlefield Casual look which they all seem to have. I’m happy with the finish althoug, yet again, the photos have me sucking my teeth at the touches of dust, the odd wrong dab, etc, which only becomes apprent at this size. Good news is it distracts me from any blurry photos.

Hasslefree are about to release another pair in this series, and I suspect they’ll be as animated, well detailed and generally brilliantly sculpted as we’ve come to expect. A must-paint.

In the Navy

November 29, 2012

Recently I traded with the cosmopolitan  Akula for the remnants of his naval forces from his VBCW project. Some of you might recall how he built an eight foot long aircraft carrier, thankfully that wasn’t part of the deal. I originally thought it was just a few figures, but it turned out to be an entire navy plus a couple of Torpedo Boats by PMC games.

A few pieces have been added, namely a splash of brown paint to bring the decking to the fore, a ships wheel, decal numbers, a lifebelt, a cleat on the bow, and to gun them up a little with a rack of three depth charges. I did look into getting a couple more PMC nautical pieces but it proved fruitless.

Of course two boats do not a navy make, so I’ve started on a midget two man submarine, which can be seen in it’s current state below. I’m still sourcing torpedos for it but expect to see a post about it once finished. The base structure is a toy submarine, Micro Machines perhaps, with the main conning tower hacked off. The fore structure had enough room to cut a window in so expect a face to be peering out of it.

I’m also going to scratchbuild a Clyde Puffer having finally tracked down some basic plans which were free. All will be kept clean of flags and nation marks so they can be used in a variety of game not least both VBCW and WW2. Full steam ahead!

Tim waits for no-one

November 29, 2012

It’s always surprising to see a paintjob you’re perfectly happy with once you’ve taken a photo of it and see it four times large and no more so than with this great figure of Tim Collins from the freebie range from The Assault Group. Enlarged it doesn’t look so good although in part that is down to the narcissistic nature of painting figures combined with the paranoid self-criticism which drives it onward. If you’re ever totally satisfied with your efforts there’s a good chance you’ll just give up there and then having reached the perfection you seek, so I’m not complaining.  It’s a simple figure to paint and I enjoyed it, right up to seeing it so large. Northwards!

Legion 2012 Photos

October 29, 2012

Sunday past saw the fifth year of our local games show Legion and although small it’s both perfectly formed and growing every year. Originally it was just three or four tables squeezed into a tiny room. This year saw the second year at the old Pfizers social club down on the Sandwich Road, with around a dozen games and about half a dozen traders. Sadly it lacked Fenris Games because Ian isn’t very well so collectively we all proclaim “Get Well Soon!”.  I did take quite a few more photos than those here, but have only posted the least blurry.

He ain’t heavy, he’s my loader…

October 17, 2012

Here’s a couple more Afghan support weapons by Eureka which I picked up at Salute 2012.   They’re the usual joy to paint, even if my photos aren’t very good. The recoiless rifle is on a very big base, and there’s a big space near the loader because the ammo box wasn’t in the bag.

Thankfully Nic at Eureka was happy to send me one all the way from Australia, not that I’ve had time to paint and add it. The weapon was a little tricky to get together right but plenty of testing was the way to do it, with gentle tweaks to get the legs of the two-part tripod the right height.

Here’s the Eureka Afghan mortar, which has one figure sculpted so you can set him up with his hand in the ammo box. Well I was impressed. A much tighter fit on the base which I prefer.

Again a slightly tricky assembly of the weapon with three pieces which have to be glued simultaneously as I see it. Should you glue the tube into the base plate seperately it might not fit onto the bipod without being too splayed. Tricky but not impossible.

Again a fine example of the brilliance of digital photography is the small hair on the base plate while making everything else slightly blurred. The hair has since been removed, imprisoned and under going severe interrogation.

Command & Conquer

October 3, 2012

I wrapped up my British modern forces with this British Infantry Platoon Command from the Assault Group and it’s a fitting end.  This pack contains two officers waving their arm around, a field radio man and a soldier with a 2 inch mortar.

When I started painting the new British MTP camo I was quite hesitant but happy with the eventual results. As I’ve done more it’s become a speedy freehanded joy although it has evolved into getting larger in pattern and lighter in overall shade. Hopefully these will mix well and produce the variations you see across a number of troops in the field.

A small hole was drilled into the top of the radio pack for a small aerial to be added using a thin pin with the head snipped off. It might not be that accurate as I’ve seen some radios which have some folding type of antenna and others which seem to thicken towards the top, almost like a silencer on a gun barrel. It suits my needs of course, and for added realism it’s likely to stop working at the most inconvenient time.

It’s very likely for these pieces to become primary targets for snipers based on the old idea that anyone waving their arms around must be an officer and should be shot first.

The 2 inch mortar is an unusual piece of kit as it’s been used by the British Army in one form or another for almost one hundred years. It started life as the 2 inch Medium Mortar in 1915, only to be dropped two years later.  By 1937 the over-titled Ordnance SBML 2 inch mortar was developed and saw service for decades until the late 1980s, being replaced by the metric L9A1 51mm Light Mortar or 2.02 inch.  Which is what is used today and this chap has. Watch out Terry Taliban.

Not a Tankless Task

September 6, 2012

A great weight has been lifted off the shoulders of the workers at Slug Industries seeing as we’ve finally got our latest, and hopefully greatest, model finished. Not a simple one this, with around forty hours on the build alone, seperate moulds for components, and the hot weather mucking up the paintjob on the first cast, but only after full highlighting. In other words a bit of a pain.

Here’s the first paintjob shortly before a lot of the surfaces simply started to crack. A few attempts at repair later and other cracks and flakes appeared. Casting another and painting that proved to be quicker.

The rear door which shows the riveting quite well.

The armoured radiator, which looks flat although it’s made of semi circular tubing, and the Dambuster style headlights. The idea being that they’re adjustable, so you could set a rang to them and when the merged lights lit up a target it’s at the predeterminde range. Probably worth a +1 on any dice roll – if it’s at night.

The first wheel layout. Ending up putting two extra pairs in after Orkdung over at VBCF quite rightly pointed out how it looked under powered. Figure gives a sense of scale.